Fastap Lamina™ For Laminates


Available in 7 sizes from 1'' to 3'' with cutting nib and Truss head types with Phillips or square drive

A Better Way To Build With Laminates.

Fastap Lamina™ screws for laminates are an easier, faster and better way to build with Melamine and laminates. They hold tight, look great and they install in one easy self-drilling, self-countersinking step. No need for any extra tools or attachments. No predrilling
with Fastap's Power Point 2™ technology and Lamina's specially engineered flathead with nibs carefully countersinks the
screw without chipping or cracking the laminate surface. And its special coarse threads fully grip and hold throughout
the full range of particleboard densities used with Melamine and laminates.

See our Fastap™ Cover-Ups™ Screw Cover Caps category for the finishing touch on your laminate project.

Cutting nibs flat head, #8 and #10 diameters, Phillips and square drives (depending on screw type), coarse drive threads, Power Point 2™ self-drilling technology, bright silver zinc finish (some available with white painted head).

Available in packaging of 250 to 10,000 pieces depending on size.


Fastap Screws - <h1>Fastap Lamina<sup>™</sup> For Laminates</h1><br><h3><i>Available in 7 sizes from 1'' to 3'' with cutting nib and Truss head types with Phillips or square drive</i></h3>

Fastap Lamina™ Laminate Carpentry 8 x 1''
Type: Laminate Carpentry Total Length: 1'' Drive Size: #2
Head Type: Countersinking Laminate Head   Root Diameter: 8
Drive Type: Phillips Thread Length: 1'' Coating: Silver Unichrome
MEL100-15.gif
Fastap Lamina™ Laminate Carpentry 8 x 1¼''
Type: Laminate Carpentry Total Length: 1¼'' Drive Size: #2
Head Type: Countersinking Laminate Head Shank Length: ¼'' Root Diameter: 8
Drive Type: Phillips Thread Length: 1'' Coating: Silver Unichrome
MEL125-15.gif
Fastap Lamina™ Laminate Carpentry 8 x 1⅜''
Type: Laminate Carpentry Total Length: 1⅜'' Drive Size: #2
Head Type: Countersinking Laminate Head Shank Length: ⅜'' Root Diameter: 8
Drive Type: Phillips Thread Length: 1'' Coating: Silver Unichrome
MEL138-15.gif
Fastap Lamina™ Laminate Carpentry 8 x 1⅝''
Type: Laminate Carpentry Total Length: 1⅝'' Drive Size: #2
Head Type: Countersinking Laminate Head Shank Length: ⅝'' Root Diameter: 8
Drive Type: Phillips Thread Length: 1'' Coating: Silver Unichrome
MEL158-15.gif
Fastap Lamina™ Laminate Carpentry 8 x 2''
Type: Laminate Carpentry Total Length: 2'' Drive Size: #2
Head Type: Countersinking Laminate Head Shank Length: ¾'' Root Diameter: 8
Drive Type: Phillips Thread Length: 1¼'' Coating: Silver Unichrome
MEL200-15.gif
Fastap Lamina™ Laminate Carpentry 10 x 3''
Type: Laminate Carpentry Total Length: 3'' Drive Size: #3
Head Type: Truss Head Shank Length: 1½'' Root Diameter: 10
Drive Type: Square Thread Length: 1½'' Coating: Silver Unichrome, Silver/White Head Unichrome
MEL300-15.gif

Product names, images, graphics, logos and/or indicia at this site are trademarks and/or exclusively created property of Faspac Inc. or Prestek Design Services. Their use without permission is a violation of copyright law. Other product names, images, graphics, logos and/or indicia used on this site and not exclusive created property of Faspac Inc. or Prestek Design Services may be the property of their respective copyright holders/owners and may be subject to copyright law. Copyright © 2019 Faspac Inc.

Fastap web site design by Prestek Design Services Bothell, WA


Click for Home